1-4
1. PRECAUTIONS
1
2
3
The machine is in a
balanced state when all
four adjustable feet are
fi rmly on the ground and
there is no movement.
y
If uneven
Adjust the lowest of the 4 adjustable feet
while lifting the washing machine a little.
Adjust the height by turning the nut to the left
as in the fi gure.
(The adjustable foot will be lengthened.)
y
y
Tighten the nut after making
the adjustments.
y
Fastening Nut
Adjusting Nut
Spanner
Driver
3. Adjust the height using the adjustable feet.
Caution
After adjusting the horizontal balance, fi x the nut tightly so that it doesn’t come loose through vibration or noise.
1-2-3. Installation Manner
1. Select an installation place in advance.
The distance between the washing machine and the wall
must be at least 10cm.
y
2. Check the balance
If you press down or shake any part of the front, left or right
side of the washing machine and it still wobbles, adjust the
feet again until the machine is standing solidly.
y
To Next Page
Loading...
