3-11
3. PRODUCT SPECIFICATIONS
3-5-3. Heater
1) Capacity: AC 230V/1900W
2) Location: Bottom of TUB
3) Function: Raise the water temperature
supplied at the wash process.
4) Resistance value: 23~29
5) Thermal Fuse: 128°C
3-5-4. Detergent tub and water supply value
A Detergent tub is composed of housing and 3 drawers . supplied water fl ows into the 3 drawer-detergent tub by way of
classifi er at each washing process. three open drainage way with detergent and supplied water by way of connector located
under the housing fl ows into washing tub. the water supply valve is composed of a cold water valve(2way) and water fl ow per
Min in the valve is below.
Cold water valve (2 way)
V1 V2
water fl ow(L/min) 10 5
resistance value 4.2 k 4.2 k
power consumption AC 220v ~ 240V 50/60Hz
usable water pressure 0.5 ~ 8 kg/km²
3-5-5. Shock absorber and buffer spring
This wash machine is equipped with 2 Shock absorbers with same capacity
and with 2 buffer springs. 2 Shock absorber are placed under the tub and
outside case , 2 buffer springs are placed on the right and left of the upper
side of outside case. Shock absorber function: during wash, dehydration
absorb the shock. buffer spring: buffering the vibration
device capacity of Shock absorber
Shock absorber 6 ± 2 kg
To Next Page
Loading...
