Calibrating your washing machine _39
05 CALIBRATING YOUR WASHING MACHINE
Calibrating your washing
machine
CALIBRATION MODE
Samsung washing machine detects the laundry weight automatically. For more accurate weight detection,
please run Calibration Mode after the installation. Calibration mode is done by following the steps below.
1. Remove laundry or any contents in the machine and turn o the machine.
2. Press the Temp button and Delay End button simultaneously, and press the Power button in addition.
Then the machine turns on.
3. Press the Start button to activate “Calibration Mode”.
4. The drum rotates clockwise and counterclockwise approximately for 3 minutes.
5. When “Calibration Mode” is finished, “End(En)” appears on the display, and the machine automatically
turns o. The washing machine is now ready for use.
[Scout 2]_WF0804W8N_EN_v1.indd 39 2011-07-28 �� 10:33:08
To Next Page
Loading...
