22 _ Disassembly and Reassembly
Part Figure Description
Door-lock S/W
1. Open the Door.
Remove the Wire Diaphragm and remove it
from The Front Frame.
For easier disassembly, remove the
spring from the lower part of the
Diaphragm with a (-) screwdriver.
Since the Diaphragm can be damaged
when removing it. Use a Longnose plier
and remove it slowly in one direction.
2. Remove the 2 screws.
3. Remove the screw holding the Door-Lock
S/W.
Remove the Door-Lock S/W.
Remove the connection wire.
(Remove the connector after releasing it by
pressing the catch.)
Leakage Sensor
(OPTION)
1. Disconnect two wire connectors.
2. Remove the six screws holding the bottom
of the FRAME-FRONT.
3. Remove the 2 screws.
To Next Page
Loading...
