Safety Instructions _ 3
BEFORE SERVICING
• Do not sprinkle water onto the washing machine directly when cleaning it.
This may result in electric shock or fire, and may shorten the product lifetime.
• Do not place any containers with water on the washing machine.
If the water is spilled, it may result in electric shock or fire. This will also shorten the
product lifetime.
• Do not install the washing machine in a location exposed to snow or rain.
This may result in electric shock or fire, and shorten the product lifetime.
• Do not press a control button using a sharp tool or object.
This may result in electric shock or damage to the product.
WHILE SERVICING
• When wiring a harness, make sure to seal it completely so no liquid can enter.
Take care when disconnecting connectors, do not use excessive force as this may damage the connector.
• Check if there is any residue that shows that liquid entered the electric parts or harnesses.
If any liquid has entered into a part, replace it or completely remove any remaining moisture from it.
• If you need to place the washing machine on its back for servicing purposes, place a support(s) on the floor and lay it
down carefully so its side is on the floor.
Do not lay it down on its front. This may result in the inside tub damaging parts.
CAUTION
CAUTION
To Next Page
Loading...
