DRAINING THE WASHING MACHINE IN AN EMERGENCY
1. Unplug the washing machine from the power supply.
2. Open the filter cover by pressing down and pulling its
handle.
3. Open the emergency drain cap by pulling it.
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out about 15 cm.
5. Allow all the water to flow into a bowl.
Remain water maybe more than you expected. Prepare
larger bowl.
6. Reinsert the emergency drain cap and the drain tube.
7. Replace the filter-cover.
cleaning and maintaining your
washing machine
Filter cover
Emergency
drain cap
Emergency
drain tube
To Next Page
Loading...
