Samsung Washer Test Modes
Subject to change without notice
Quick Test Mode WF328, WF337
Pwr OFF press SPIN, Silver Care and
POWER at the same time
Quick Test Mode WF448 *Will Erase Fault Codes*
Pwr Off press Soil Key, Signal Key and Power Key at the same time. When the
version is displayed, turn the Jog-Dial so that the version disappears.
Quick Test Mode WF203, WF206, WF306,
WF316, WF317, WF326, (WF209, WF419 *Will
Erase Fault Codes*)
Pwr OFF press SPIN, SOIL and POWER at the
same time
Quick Test Mode WF338 *Will Erase Fault
Codes*
Pwr Off Press Spin Key, Steam and Power
Key at the same time. When the version is
displayed, turn the Jog-Dial CCW so that the
version disappears.
Use: Soil, Signal, & Power on some
production dates
Due to the many variations in the Quick Test Mode it is important to use the Fast Track Manuals
Quick Test Mode WF218, (after 4/1/09*Will
Erase Fault Codes*)
Pwr OFF press SPIN, SOIL and POWER at the
same time
Effective 4/1/2009 a software change was
made.
After the displaying the software version,
turn the Jog dial CCW to display “F4” for
test modes
To Next Page
Loading...
