1) Place the Assy-Pump Drain into the
unit.
2) Insert the pump cushion into the
opening at the base of the unit.
3) Once the pump cushion is inserted
into the opening slide the assembly
forward to lock.
4) After the Assy-Pump is locked in
place secure the pump bracket to
the base of the unit.
If the Assy-Pump is installed without placing the
pump cushion into the opening at the base of
the unit. The filter assembly will hit against the
metal bracket at the front of the unit, causing
the pump assembly to make noise.
INCORRECT INSTALL CORRECT INSTALL
Pump
Noise
Issue
To Next Page
Loading...
