SERVICE BULLETIN
WF209ANW/XAA, WF218ANB/XAA , WF218ANW/XAA
WF219ANB/XAA , WF219ANW/XAA
SYMPTOM: When the cold water temperature is low, especially
in winter months, the washer has a more difficult time balancing,
creating excessive vibration. The washer may extend the spin
time or finish the last spin with clothes remaining wet.
REPAIR: First verify the current version of software in the unit.
This can be done by pressing the SPIN, SOIL LEVEL and POWER
buttons simultaneously with the power off. The software version
will be displayed on the front panel display followed by 1e.
Refer to the version table listed below to determine if a new
main PCB is required.
Questions or comments? Please e-mail richard.kuemin@marcone.com
To Next Page
Loading...
