Samsung WF56H9100A - Page 14

12 _ Removal and Reassembly
Part Figure Description
Separating the
Cover_Top and
Panel-Control
(Check Sub-PCB)
1. Removethe2hexagonscrews,whichareatthe
back,xingtheCOVER-TOP.
2. DisassembletheCOVER-TOPbyslidingit
backwards.
3. PresstheSeparatebuttontoseparatetheASSY
Drawer.
4. Removethe2screwsholdingtheHOUSING-
DRAWERanddisassembletheHOUSING
DRAWERfromthePANEL-CONTROL.(pushback
andthenpushHOUSING-DRAWERupsideto
separate).