Samsung WF56H9100A - Page 16

14 _ Removal and Reassembly
Part Figure Description
Separating the Main
PCB
1.Removethe2screwsholdingtheASSYPCB-MAIN
atthebackofthewashingmachine.
2.Separatethe2Hooksbypushingitrightwards.
3.PushtheTUBupsidetoseparateASSYPCB-MAIN.
andseparatetheASSYPCB-MAINliftingitup.
4.Separatethe4Hooks.
5.DisconnectAllconnectorsonmainPBA.
LiftupMainPBA,ChangeSVCPart.
AfterSVC,CertainlychecktheallHookson
COVER-PCB(M)
 OtherwiseCOVER-PCB(M)willbedisassembled
duringwashingmachinerunning.