To Next PageTo Next PageWhat does it mean when a Mems PBA error is detected on my Samsung WF706U2SA?
A Mems PBA error on your Samsung Washer indicates that there is an error detected in the Mems PBA or a data error. Check the wire connections and replace if necessary.
General| Washing Capacity | 7 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Capacity | 7 kg |
| Color | White |
| Dimensions | 60 x 60 x 85 cm |
Instructions for safe operation and prevention of accidents during servicing.
Precautions to take before starting any service work on the machine.
Precautions to take while performing service on the machine.
Precautions to take after completing service work.
Description of core features like Big Door, Diamond Drum, and Bubble Wash technology.
Description of model-dependent features such as Air Refresh and Water Safety Systems.
Technical specifications including dimensions, capacity, power consumption, and spin speed.
Comparison of model features against similar existing washing machine models.
List of optional accessories and their corresponding part codes and remarks.
Lists necessary tools required for dismantling and reassembling various machine components.
Step-by-step visual guide for disassembling common machine components like the top cover and panel.
Lists all error codes, their potential causes, and associated conditions for the washing machine.
Provides specific troubleshooting steps and corrective actions to resolve identified error codes.
Detailed diagram of the main printed circuit board, showing component locations and terminal functions.
Circuit schematics illustrating key sections and connections on the main PCB.
Diagram of the sub printed circuit board, detailing component layout and connections.
Detailed views of connectors on the sub PCB for system communication and programming.
Comprehensive diagram illustrating electrical connections between main PCB, sub PCB, and all machine components.
Electrical schematic detailing the main control system, including power supply and load control.
Electrical schematic detailing the sub control system, including microcontrollers and communication interfaces.
Explanation of the model naming convention and its components for the SENIE project.
