Samsung WF806U4SA series - Installation Requirements

12 _ Disassembly and Reassembly
3-2. STANDARD DISASSEMBLY DRAWINGS
► Thisisastandarddisassemblydiagramandmaydifferfromtheactualproduct.
Usethismaterialasareferencewhendisassemblingandreassemblingtheproduct.
Part Figure Description
Assy Cover Top
1. RemovethetwoscrewsholdingtheTop
Coveratthebackoftheunit.
2. Removethetop-coverbyliftingitupafter
pullingitbackabout15mm.
Watervalve
Noiselter
Sensor pressure
3. NowtheWater(pressure)Sensor,Noise
Filter,WaterValveandmainPCBcanbe
replaced.