EasyManua.ls Logo

Samsung WF806U4SA series - Page 33

Samsung WF806U4SA series
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting _ 31
Error Type Error Mode Causes Corrective Actions Description of Photo
WaterSupply
Error
4E
4E1
4E2
• Watersupplyvaluefault
• MainPCBfault
• Freezinginthewinterseason
• Checkthewatersupplyvalve
whetheronlycoldmodelorhot
andcoldmodelIncorrected
connection can occur an error
• Ifthewatersupplyvalvehasawire
disconnected,replaceit.
• Checkwhetherthewatersupplyvalveis
cloggedwithforeignmaterialandwhether
waterissuppliedcontinually.
• Checkwhethernowaterissuppliedbecause
offreezinginthewinterseason.
• IfthePBArelayoperatesabnormally,replace
thePBA.
[
BITRON
]
[
SEIL
]
1. Checktheresistanceforthe
watersupplyvalve.
- Resistance
BITRON 3.895to4.305kΩ
SEIL 3.645to4.455kΩ
betweentheterminalsofthe
watersupplyvalve.
2. Checkwhetherthereis
foreignmaterialinthewater
supplyvalvediaphragm.
Drain Error 5E
• Drainpumpfault
• Freezinginthewinterseason
• Foreignmaterialsinthedrain
pump
• MainPCBfault
• Checkwhethertherevolutionsofthedrain
pumpmotorarerestrainedbyforeignmaterial.
• Checkthesamethingforthenaturaldrain
process.
• Checkwhethertheconnectionsarecorrect
andifthereisanywiresdisconnected.
• Ifthedrainpumpoperatesabnormally
intermittentlywhenthetemperatureofthe
waterinthetubishigh.
• Ifthemotorrevolutionsarerestraineddue
tofreezinginthewinterseason,checkthe
methodforremovingthefreezingandremove
asdirected.
► DRAINPUMP
Resistance:Approximately
182~222Ωbetweenthe
TerminalsfortheWater
SupplyValve
Communication
Error
AE
• Thesignalsbetweenthesuband
mainPBAsarenotsensed.
• Incorrectwireconnections
betweenthesubandmainPBAs.
• Checkthewireconnectionsandterminal
contactsbetweenthesubandmainPBAs.
• Checkfordisconnectedwires.
• CheckwhetherthesubPBAisshort-circuited
becauseofmoisture.
• IfthemainPBA’scommunicationcircuitis
faulty,replaceit.
-

Other manuals for Samsung WF806U4SA series

Related product manuals