English - 37
07 CYCLE CHART
Cycle chart
Cycle chart
( user option)
CYCLE
Max load (kg) DETERGENT
Max Temp
(˚C)
Spin Speed (MAX) rpm
WF80F5 WF70F5 WF60F4 Prewash Wash Softener 1400 1200 1000
Cotton 8.0 7.0 6.0 Yes
95 1400 1200 1000
Synthetics 3.5 3.5 3.0 Yes
60 1200 1200 1000
Denim 3.0 3.0 3.0 Yes
60 800 800 800
Stain Away 4.0 4.0 3.0 Yes
60 1200 1200 1000
Dark Garment 4.0 4.0 3.0 Yes
40 1200 1200 1000
Daily Wash 4.0 4.0 3.0 Yes
60 1400 1200 1000
Eco Drum Clean - - - - - - 70 400 400 400
Super Eco Wash 4.0 4.0 3.0 Yes
40 1200 1200 1000
Outdoor Care 2.0 2.0 2.0 -
40 1200 1200 1000
Baby Care 4.0 4.0 3.0 Yes
95 1400 1200 1000
Wool 2.0 2.0 1.5 -
40 800 800 800
Hand Wash 2.0 2.0 1.5 -
40 400 400 400
CYCLE Delay End Intensive Soak Easy Iron 15’ Quick Wash
Cotton
Synthetics -
Denim
-
Stain Away
-
Dark Garment
- -
Daily Wash
-
Eco Drum Clean
- - - -
Super Eco Wash
-
Outdoor Care
- - - -
Baby Care
-
Wool
- - - -
Hand Wash
- - - -
1. A cycle with a prewash takes approx. 20 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC60456/
EN60456.
Please run Calibration Mode after the installation (refer to the "STEP 6 - Running Calibration Mode"
section on page 18).
3. Daily Wash : A short cycle for test institutes.
4. Since this washing machine comes with the Last Memory function, to remove the Last Memory setting
and use the original startup settings, you need to clear the last used setting on the control panel. (For
information on how to clear the last used setting, refer to the descriptions about the "Last Memory
function" on page 21.)
5. Cycle time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
6. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
F500E_WF80F5E-03234K-02_EN.indd 37 2014-01-15 �� 4:23:22
To Next Page
Loading...
