17
Setting up your washing machine
STEP 3 - Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply, and the drain
are easily accessible.
1. Slide the washing machine into position.
2. Loosen all the lock nuts with the wrench.
3. Level your washing machine by turning the levelling feet in and
out as necessary by hand.
4. When your washing machine is level, tighten the lock nuts using
the wrench.
STEP 4 - Connecting the water and the drain
Connecting the water supply hose
WARNING: Do not connect multiple water supply hoses. This may result in a water leak and electric
shock due to the water leak. If the hose is too short, replace the hose with a longer, high pressure
hose.
1. Connect the L-shaped arm fitting for the cold water supply hose
to the cold water supply intake at the back of the machine. Then
tighten it by turning part (A) clockwise by hand.
(*): Optional
To Next Page
Loading...
