Samsung X15Plus - Setting the User Password

6-5
Chapter 6. Customizing your computer
O
Setting the User Password
You can configure user passwords so that other users can use the system.
On the ‘Set User Password’ item, press <Enter>, and complete step 3-4 of
Configuring the Supervisor Password.
O
Activating the Booting Password
Set the ‘Password on boot’ option to [Enabled].
From now on, you must enter the password to boot the system.
O
Activating the Hard Disk Drive Password
Activating the hard disk drive password prevents the currently installed hard disk
drive from being used in other systems.
In the ‘Set HDD 0 Password’ item, press <Enter>, and complete step 3-4 of
Configuring the Supervisor Password.
O
Deactivating the Password
1. On the password to delete, press <Enter>. (e.g. supervisor password)
2. Enter the current configured password, and press <Enter>.
3. Leave the ‘New Password’ and ‘Confirm New Password’ field empty, and press
<Enter> to deactivate the password.
Before activating a user password, a supervisor password must have been config-
ured.
Users can start the system with their user password, but cannot enter into the
System Setup.
Deactivating the supervisor password also deactivates the user password.
NN
NN
oo
oo
tt
tt
ee
ee
Before activating the booting password, the supervisor password must have been
configured.
NN
NN
oo
oo
tt
tt
ee
ee
Before activating the hard disk drive password, the supervisor password must
have been configured.
NN
NN
oo
oo
tt
tt
ee
ee