Network setup
223
3. Useful Setting Menus
Protocol Mgr.
• SNMPv1/v2: You have to enable this option to use
SNMP V1/V2 protocol. Administrator’s can use SNMP
to monitor and manage machines on the network.
• UPnP(SSDP): You have to enable this option to use
UPnP(SSDP) protocol.
Turn the power off and on after you change this
option.
• mDNS: You have to enable this option to use MDNS
(Multicast Domain Name System) protocol.
• SetIP: You have to enable this option to use SetIP
protocol.
• SLP: You can configure SLP (Service Location
Protocol) settings. This protocol allows host
applications to find services in a local area network
without prior configuration.
Turn the power off and on after you change this
option.
Option Description
To Next Page
Loading...
