SAMT RGD350 - Packing List; Tools Required; Door Requirements

- 6 -
3.DOOR REQUIREMENTS
The maximum allowable door height is 5.5m. The door must be of continuous corrugated sheet
construction and spring balanced. Door axle diameter must not exceed 35mm.
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the
roller door drum is on the edge of the curtain or is a smaller diameter, additional clearance may be
required.
If the drum is more than 60 mm from the curtain edge or of a smaller diameter, an extension
pole kit may be required (section 10).
Ensure there is a power point near the opener.
1.Packing List
Standard list ：
1.Rolling garage door opener X 1；
2.Remote control X 2；
3.Instructions X 1；
4.Clutch pull rope X 1；
5.Warning Label X 1；
Selection list：
1.Weight bar X 1;
2.Wall switch X 1;
3.Extension pole bag X 1;
2.TOOLS REQUIRED
Ladder
Socket wrench
Adjustable
Wrench
Drill
Marker Pen
13MM Socket
≥250MM Socket
Extension
Philips-head
Screwdriver
6.5MM Drill Bit