Samwontech TEMI 2500 - Page 38

SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 36 / 58
7.10 INPUT Group
This INPUT group is used for setting parameter D-Register for sensor and its bias.
█ INPUT setting D-Register
D-Reg. Symbol Descriptions
D0901 TEMP.IN Temperature INPUT SENSOR type
D0902 TEMP.INRH Temperature Range HIGH
D0903 TEMP.INRL Temperature Range LOW
D0904 TEMP.BIAS Temperature offset value of ALL BIAS for whole range.
D0905 TEMP.INFL Temp. sensor filter to suppress fluctuation by Noise
D0906 TEMP.INSH Temperature SCALE HIGH of whole range (SPAN)
D0907 TEMP.INSL Temperature SCALE LOW of whole range (SPAN)
D0910 HUMI.IN Humidity INPUT SENSOR type
D0911 HUMI.INRH Humidity Range HIGH
D0912 HUMI.INRL Humidity Range LOW
D0913 HUMI.BIAS Humidity offset value of ALL BIAS for whole range.
D0914 HUMI.INFL Humidity sensor filter to suppress fluctuation by Noise
D0915 HUMI.DFL Humidity Display Filter to adjust PV waving
D0916 HUMI.INSH Humidity SCALE HIGH of whole range (SPAN)
D0917 HUMI.INSL Humidity SCALE LOW of whole range (SPAN)
D0920 DRY.LH DRY temperature range Limit HIGH
D0921 DRY.LL DRY temperature range Limit LOW
D0922 WET.ADJV Equalize DRY and WET temperature
D0933~D0936 BP1.DDV~BP4.DDV Piece BIAS offset value for each DRY temp. Bias Point
D0937~D0940 BP1.DPV~BP4.DPV DRY temp.Bias Point to apply offset value
D0943~D0946 BP1.WDV~BP4.WDV Piece BIAS offset value for each WET temp. Bias Point
D0947~D0950 BP1.WPV~BP4.WPV WET temp.Bias Point to apply offset value
D0953~D0956 BP1.HDV~BP4.HDV Piece BIAS offset value for each Humidity Bias Point
D0957~D0960 BP1.HPV~BP4.HPV Humidity Bias Point to apply offset value