SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 38 / 58
7.12 DO CONFIG Group
DO CONFIG group consists of setting and information parameter D-Register related to establish RELAY number on
I/O board to generate signal and its sub setting for auxiliary Digital Output.
█ DO CONFIG setting and information D-Register
D-Reg. Symbol Descriptions
D1101~D1110 IS1.RLY~IS10.RLY RELAY No.on I/O for INNER SIGNAL
D1111 UKEY.RLY RELAY No.on I/O for USER KEY signal
D1112~D1115 TS1.RLY~TS4.RLY RELAY No.on I/O for TIME SIGNAL
D1116~D1123 ALM1.RLY~ALM8.RLY RELAY No.on I/O ALARM signal
D1124~D1153 T1.RLY~H5.DYT RELAY No.on I/O and DELAY TIME for ON/OFF SIGNAL
D1154,D1155 TRUN.RLY,TRUN.DYT RELAY No.on I/O and DELAY TIME for TEMP. RUN signal
D1156,D1157 HRUN.RLY,HRUN.DYT RELAY No.on I/O and DELAY TIME for HUMI. RUN signal
D1158,D1159 TSOPN.RLY,TSOPN.KPT RLY No.on I/O and KEEP TIME for TEMP.SENSOR-OPEN signal
D1160,D1161 HSOPN.RLY,HSOPN.KPT RLY No.on I/O and KEEP TIME for HUMI.SENSOR-OPEN signal
D1162,D1163 TWAIT.RLY,TWAIT.KPT REALY No.on I/O and KEEP TIME for TEMP. WAIT signal
D1164,D1165 HWAIT.RLY,HWAIT.KPT REALY No.on I/O and KEEP TIME for HUMI. WAIT signal
D1166,D1167 TUP.RLY,TUP.DEV RELAY No.on I/O and DEVIATION for TEMP. UP signal
D1168,D1169 HUP.RLY,HUP.DEV RELAY No.on I/O and DEVIATION for HUMI. UP signal
D1170,D1171 TSOAK.RLY,TSOAK.KPT REALY No.on I/O and KEEP TIME for TEMP. SOAK signal
D1172,D1173 HSOAK.RLY,HSOAK.KPT REALY No.on I/O and KEEP TIME for HUMI. SOAK signal
D1174,D1175 TDOWN.RLY,TDOWN.DEV RELAY No.on I/O and DEVIATION for TEMP. DOWN signal
D1176,D1177 HDOWN.RLY,HDOWN.DEV RELAY No.on I/O and DEVIATION for HUMI. DOWN signal
D1178,D1179 FEND.RLY,FEND.KPT RLY No.on I/O and KEEP TIME for FIX-END signal
D1180,D1181 PTEND.RLY,PTEND.KPT RLY No.on I/O and KEEP TIME for program PTN-END signal
D1182,D1183 DRAIN.RLY,DRAIN.KPT RELAY No.on I/O and OPER.TIME for DRAIN signal
D1184,D1185 DRAIN_RH,DRAIN_RL Range High/Low limit for DRAIN ON/OFF operation
D1186,D1187 ERROR.RLY,ERROR.KPT REALY No.on I/O and KEEP TIME for ERROR signal
D1188,D1189 1REF.RLY,1REF.DYT RELAY No.on I/O and DELAY TIME for 1
st
Refrigerator oper.
D1190,D1191 2REF.RLY,2REF.DYT RELAY No.on I/O and DELAY TIME for 2
nd
Refrigerator oper.
To Next Page
Loading...
