Samwontech TEMP2000 Series - Page 26

SAMWONTECH
1th Edition of TEMP2000_Series IM : Dec. 15. 2008 Page 24 / 63
7. D-REGISTER Description
D-Register is group of communication data to monitor and control all status of TEMI2500.
D-Register is grouped by consecutive 100 addresses based on its concerned function as shown below.
D-Register address Group Name Description Read Write
D0001~D0099 PROCESS General operation process information ○ ◈
D0100~D0199 FUNCTION Operating Function setting ○ ○
D0200~D0299 RESERVATION Time & Reserve operation setting ○ △
D0300~D0399 ON/OFF SIGNAL ON/OFF signal setting ○ ○
D0400~D0499 INNER SIGNAL INNER signal setting ○ ○
D0500~D0599 ALARM SIGNAL ALARM signal setting ○ ○
D0600~D0699 SEG ALARM SIGNAL SEGMENT ALARM signal setting ○ ○
D0700~D0799 TIME SIGNAL TIME signal setting ○ ○
D0800~D0899 COMMUNICATION Communication concerned information ○ △
D0900~D0999 PICTURE USER SCREEN setting ○ ○
D1000~D1099 PID1 P.I.D setting-1 ○ ○
D1100~D1199 PID2 P.I.D setting-2 ○ ○
D1200~D1299 INPUT Sensor Input setting ○ ○
D1300~D1399 OUTPUT Control& retransmission Output setting ○ ○
D1400~D1499 DO CONFIG1 DO(Digital Output) Relay setting-1 ○ ○
D1500~D1599 DO CONFIG2 DO(Digital Output) Relay setting-2 ○ ○
D1600~D1699 DI CONFIG1 DI(Digital Input) setting ○ ○
D1700~D1799 DI CONFIG2 DI NAME input-1 ○ ○
D1800~D1899 DI CONFIG3 DI NAME input-2 ○ ○
D1900~D1999 INITIAL1 Initial system setting-1 ○ ○
D2000~D2099 INITIAL2 Initial system setting-2 ○ ◈
D2100~D2199 PROGRAM Program pattern profile setting ○ ○
D2200~D2299 PATTERN INFO Pattern profile information ○ ◈
D2300~D3999 FILE1 ~ FILE17 Recorded Trend file information ○ ◈
☞
D-Register is composed of hexadecimal 4 digit (2-Byte).
▪ ○ : Available to read / write over all designated address range.
▪ △ : Available to read / write in part of designated address range.
▪ ◈ : Not available to read / write over all designated address range.