San Telequip SC10MK2 - User Manual

San Telequip (P) Ltd.,
504,505 Deron Heights, Baner Road
Pune 411 045, India
Phone : +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email : info@santelequip.com
User Manual 2-Port TCP to RTU Gateway, Model SC10MK2 485 IOT 502
Table of Contents
Introduction ______________________________________________________________________________ 1
Product Specifications ______________________________________________________________________ 2
Product Panel Views _______________________________________________________________________ 3
Wiring Architecture ________________________________________________________________________ 5
Configuration _____________________________________________________________________________ 6
IP Search Utility Setup ___________________________________________________________________ 6
Web Browser Configuration _______________________________________________________________ 9
1. System Setup ___________________________________________________________________ 9
2. Network ______________________________________________________________________ 11
3. Serial ________________________________________________________________________ 13
3.9 Service: Modbus TCP Gateway - Select both Serial1 and Serial2 at the same time against a
specified TCP socket port commonly. ____________________________________________________ 14
4. Access IP Control _______________________________________________________________ 15
5. Save & Restart _________________________________________________________________ 16
6. Backup Settings ________________________________________________________________ 16
Introduction
SC10MK2 485 IOT 502 Modbus TCP to RTU Gateway provides easy way of connecting Modbus RTU devices to
Wireless and Ethernet LAN. The wireless supports 802.11 b/g/n in AP/Station mode with WEP/WPA/WPA2
encryption for data transmission security. The Ethernet support 10/100 Mbps auto-detecting communication
speeds. This Gateway is designed to operate 2 Serial ports (RS-232/RS-422/485 Auto detect) over Wireless and
Ethernet network. It allows users to integrate Modbus/RTU and Modbus Serial devices to the TCP/IP network
with 8 TCP Masters simultaneously and 32 requests simultaneous per TCP Master.
SC10MK2 485 IoT 502 embedded with MT7688AN MIPS chipset makes it become the ideal device for
transmitting the data from your RS-232 or RS-422/485 Serial interface devices, such as PLCs, Meters and
Sensors to an IP-based Wi-Fi and Ethernet LAN. It is a high performance design composed with carefully
selecting qualified components from reliable and certified sources. This operation manual will guide you to
configure functions step by step.

Summary

Introduction

Product Specifications

System Specifications

Technical details on CPU, RAM, ROM, and OS of the device.

Ethernet Specifications

Details on Ethernet port type, speed, and protocols.

WiFi Specifications

Parameters for WiFi connectivity including standard, speed, and security.

Serial Port Specifications

Specifications for RS-232, RS-422, and RS-485 serial ports.

Power Specifications

Power input requirements and consumption details.

Mechanical and Environmental Specifications

Physical dimensions, weight, operating temperature, and housing.

Other Features

Additional features like GPIO, I2C, SD, and USB interfaces.

Product Panel Views

Antenna Connector Details

Description of the SMA antenna connector and its specifications.

Ethernet Port Description

Explanation of the RJ45 Ethernet port and its LEDs.

Serial Port Connection Guide

Instructions for connecting serial devices to the gateway's ports.

Wiring Architecture

RS-232 Wiring Diagram

Shows how to connect a serial device via RS-232 to the gateway.

RS-422;RS-485 Wiring Diagrams

Illustrates wiring for RS-422 and RS-485 serial connections.

Gateway Configuration

IP Search Utility Setup

How to use the utility to find the gateway's IP address.

System Setup

Configuring system date, time, hostname, and description.

Network Configuration

Setting up WiFi and Ethernet network parameters.

Serial Port Configuration

Configuring baud rate, parity, data bits, and stop bits for serial ports.

Service Configuration

Setting up Modbus TCP Gateway service and slave ID table.

Access IP Control

Managing IP access control list for device access.

Save and Restart

Applying and saving configuration changes, and rebooting the device.

Backup Settings

Downloading current gateway configuration for backup.

TCP Keepalive Settings

TCP Keepalive Time

Setting the idle time before probes are sent.

TCP Keepalive Interval

Setting the interval between keepalive probes.

TCP Keepalive Probes

Setting the number of probes to check connection status.

Restore Settings

Restore Settings Procedure

Steps to upload a backup configuration file to restore settings.

Restore Default

Restore Default Procedure

Action to reset the device to its factory default settings.

Upgrade Firmware

Firmware Upgrade Process

Guidance on upgrading the device firmware and subsequent actions.

Account Management

Change Login Credentials

Procedure for changing the username and password for device login.

Reboot Device

Reboot Procedure

How to restart the gateway device.

Logger Information

View System Logs

Accessing and viewing the device's system status and event logs.

Reset Functionality

Factory Reset Procedure

Instructions for performing a hardware reset to factory defaults.

RS-232 Pin Assignment

RS-232 Pinout Details

Detailed pin assignment scheme for the RS-232 9-pin male connector.

RS-232 Connection Mapping

Mapping of SC10MK2 side pins to COM Port side signals for RS-232.

RS-422;485 Pin Assignment

RS-422 Connection Details

Mapping of SC10MK2 RS-422 signals to device connections.

RS-485 Connection Details

Mapping of SC10MK2 RS-485 signals to device connections.

San Telequip SC10MK2 Specifications

General

Brand	San Telequip
Model	SC10MK2
Category	Gateway
Language	English