Need help?Do you have a question about the Sanden Vendo G-SNACK and is the answer not in the manual?
Instructions on how to enter the service mode for programming and diagnostics.
Specific error codes and explanations for master vending mechanism issues.
Specific error codes and explanations for slave vending mechanism issues.
Explains various control errors like door switch and communication issues.
Details errors related to the selection switch functionality.
Describes error codes and causes for the coin changer.
Explains error messages and troubleshooting for the bill validator.
Details errors detected by the optical barrier system.
Covers errors related to temperature sensors and levels.
Introduces the testing procedures for machine components.
Testing the vending motors on master and slave machines.
Procedure to access protected menus using a password sequence.
Core configuration for setting vend prices on the master machine.
Setting vend prices specifically for the slave machine.
Configuring installed motors and their positions for the master machine.
Configuring installed motors and their positions for the slave machine.
General machine settings and parameter configurations.
General| Category | Vending Machines |
|---|---|
| Type | Snack Vending Machine |
| Brand | Sanden Vendo |
| Model | G-SNACK |
| Capacity | Varies by configuration |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Payment Options | Coin, bill, and cashless payment options (credit/debit cards, mobile payments) |
| Display | LCD |
To Next Page
