To Next PageTo Next Page
Need help?Do you have a question about the Sanden Vendo SVE 100 and is the answer not in the manual?
The manual contains correct procedures for loading, usage, maintenance, and installation of vending machines.
Identifies target audience: loading operators, final users, installers, and maintenance technicians.
Manufacturer's responsibility limited to correct usage; declines liability for damages from incorrect installation, parts, modifications, or misuse.
SandenVendo Europe S.p.A. claims over 50 years of experience in manufacturing vending machines.
SandenVendo Europe S.p.A. is represented by a sales network in Italy and Europe.
Warranty covers components for 24 months for the cooling unit, excluding labor.
Read manual, protect from weather, avoid direct sunlight, disconnect power before assistance.
Details dimensions, electrical specifications, cooling system, refrigerant, and climate class of vending machines.
Lists and illustrates external and internal components of the vending machine.
Details the coin entry, selection buttons, and displays on the front panel.
Describes the control box, its cover, and connection to the coin mechanism.
Explains the components and operation of the cooling system, including compressor and fans.
Details the motor, cams, switches, and other parts of the product dispensing mechanism.
Provides instructions for safely transporting and positioning the vending machine, including weight and dimensions.
Specifies suitable installation environments, temperature, air circulation, and surface load capacity.
Step-by-step guide to remove wooden bases using a trans pallet and spanner.
Instructions on how to level the machine using adjustable feet for stability and proper operation.
Recommends optional kits for securing the machine against overturning or vandalism.
Details electrical connection checks, grounding, plug accessibility, and cable safety precautions.
Guides on how to mount and adjust the coin mechanism, including connections.
Explains that control and operation settings are managed via the electronic board's programming routine.
Refers to the programming manual for setting prices for each selection and pairing columns.
Instructions on how to install product labels on the selection windows.
Describes how to access the vending mechanism motors by opening the internal door.
Caution against loading products different from those recommended by the manufacturer.
Specifies that 'Super Stack' columns vend cylindrical products within given diameter and length measures.
Explains that packages can be stacked in double depth (2D) or single depth (1D) columns.
Provides step-by-step instructions for converting column stacking modes from 1D to 2D and vice-versa.
Details how to use shims for product stacking, measure distances, and place products on shelves.
Steps to perform after loading: complete column load, make selections, check reloading and delivery.
Reiterates that control and operation settings are managed via the electronic board's programming routine.
Instructions for powering up the machine, checking switches, executing programming, and loading products.
Explains that internal access requires a special key for maintenance operations.
Periodic checks: signs of rust, water accumulation, blocked evaporator, door seals, condenser cleanliness, fans, compressor.
Step-by-step guide to replace neon lamps, including power disconnection and re-closing the door.
General advice for cleaning, checking for rust, and avoiding water jets.
Safety precautions for cleaning: cut power, do not use sharp tools, avoid direct sunlight, use recommended materials.
Detailed instructions for cleaning painted areas, neon advertising board, cooling area, and delivery exit.
Lists recommended products (neutral detergent, compressed air) and forbidden products (abrasives, solvents).
Advises wearing protective gloves/clothing and following product instructions during cleaning.
Explains various warning messages and symbols used on the vending machines to indicate dangers.
Instructions for storing the vending machine for long periods, including environmental conditions and corrosion protection.
Information on environmental protection, recycling procedures for packing and the machine as WEEE.
Details the legal obligation for disposal personnel to identify and separate WEEE waste.
Mentions sanctions for illegal disposal of WEEE waste according to national decrees and directives.
General| Brand | Sanden |
|---|---|
| Model | Vendo SVE 100 |
| Category | Vending machines |
| Language | English |
