V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230239
SECTION VI: SUBSTITUTIONS AND MODIFICATIONS
GENERAL
Unauthorized changes or the substitution of unauthorized parts can compromise the equipment
designs. This can result in unsafe conditions for either the service personnel or the equipment
users. Always refer to the appropriate parts and service manual for replacement parts and
maintenance instructions. If questions arise, contact the Technical Services Department of the
SandenVendo America, Inc. office in your area.
When servicing the vending machine, always reassemble all components to their original
location and position. Maintain the correct routing for tubing, electrical wiring, etc. Replace all
clamps, brackets, and guides to their original locations. Replace all tubing, sleeving, insulating
material, and protective covers to their original condition.
A. Service Cord Replacement
SandenVendo America, Inc. vending machines are furnished with unique power supply
cords. If replacement becomes necessary, consult the appropriate parts and service
manual and order the correct replacement cord for the model of vending machine in
question. Do not use substitute replacement cords. Only authorized service personnel
with appropriate training should replace the vending machine service cord. If a question
should arise concerning which service cord to order, contact the Technical Services
Department of the SandenVendo America, Inc. office in your area.
SandenVendo America, Inc. EQUIPMENT HAS BEEN PROVIDED WITH
APPROPRIATE PROTECTIVE DEVICES TO PROTECT AGAINST THE
POSSIBILITY OF OVERHEATING AND FIRE AS A RESULT OF
EQUIPMENT OR COMPONENT FAILURES. SUBSTITUTION,
MODIFICATION, OR BYPASSING OF SUCH PROTECTIVE DEVICES CAN
CREATE DANGEROUS CONDITIONS. PROTECTIVE CIRCUITS SHOULD
NEVER BE BYPASSED, AND FAILED PROTECTIVE DEVICES MUST BE
REPLACED ONLY WITH FACTORY-AUTHORIZED PARTS.
V21 Safety | S-11
To Next Page
Loading...
