EasyManua.ls Logo

SandenVendo V21 621 - VEC Coke Chameleon Programming Operation

Default Icon
257 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230263
VEC COKE CHAMELEON PROGRAMMING OPERATION
NOTE: Some units may contain a European font display, in which case the “°” symbol will
be replaced by the “ß” symbol. Example: 72°F will be 72 ß F.
The VEC 12.6 Controller uses a 4-button programming system:
Programming Buttons: # 1 – Escape/Exit
# 2 – Decrease/Scroll Down
# 3 – Increase/Scroll Up
# 4 – Enter and/or Save
To access Mode functions, open the door. Locate the Mode Button on the Main Control Board
and press until Diagnostics appears. Use selection button 2 or 3 to navigate through the modes.
The Modes are as follows:
Diagnostics
Coin Payout
Tube Fill
Recycler Payout*
Recycler Fill*
Test Mode
Password
Cash Data
Sales Data
Set Price
Correct Change Only
Set Depth
Configuration
Space to Sales
Door Closed Password
Set Language
Set Clock **
Lighting **
Refrigeration ***
Sales Block 1 **
Sales Block 2 **
Discount **
Override ***
Return
* These modes will only appear if a recycler is being used in MDB level 4 mode.
** These modes will only appear when the “Timing Feature” in Configuration is turned On.
*** Limited options appear in this mode depending on whether the Timing Feature in
Configuration is On/Off.
V21 12.4 Programming Coke Chameleon | P2-2

Related product manuals