V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230328
Deny Escrow
ON = The validator will stack all bills received.
OFF = The validator will not stack the bills, rather it will hold them in escrow until a
vend is complete.
SO Indicator
ON = A small symbol will appear in the lower right hand corner of the display when at
least one column is sold out or the machine detects an error.
OFF = The symbol will not appear.
Count by Selection/Price
COUNT BY SELECTION = Individual sales and cash data will be reported in unit sales.
COUNT BY PRICE = Individual sales and cash data will be reported by vend price.
MIS Reset W/DEX
ON = MIS data will be reset with a DEX read.
OFF = MIS data will not be reset with a DEX read.
Depth Learning
ON = The control board will “learn” the depth setting after one row of product in the
column is vended.
OFF = The control board will not “learn” the depth setting.
Display Temperature
ON = Display the refrigeration temperature.
OFF = Do not display the refrigeration temperature.
# of Selections 6/12
Number of Selections: 6 = 6 select vendor
Number of Selections: 12 = 12 select vendor
• To adjust any of the settings, press (2) at “Configuration” mode.
• Press (1) to scroll through modes.
• Press (2) to change the mode. The current setting will begin to flash.
• Press (1) to change current setting.
• Press (2) to save change.
• Press (3) to exit sub-mode.
DSP MSG
Pepsi = Displays brand name.
Beverages = Displays generic name.
V21 12.3
Programming HVV | P4-7
To Next Page
Loading...
