EasyManua.ls Logo

Sander CERTIZON C25 - Safety Information

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Safety Information
The ozonizer is used at the owner’s risk. Do not use the ozonizer before
reading and understanding all instructions, procedures and warnings.
The ozonizer must not be allowed to fall into water or otherwise come into
contact with water. Do not use the Ozonizer in a flammable or explosive
atmosphere.
The surfaces of the connection plate of the ozone element (5) can be hot.
Allow the device to cool down before cleaning it.
Airborne ozone can be harmful to health if it enters the respiratory system.
Every effort must therefore be made to ensure that only the volume of ozone
that is required in the application is produced. The permissible TLV (thresh-
old limit value) for ozone is 0.1 ppm (200 µg/m³); although ozone can be
sensed even at 1/5 to 1/10 of this value (0.02 ppm). In the USA, an IDLH
(Immediately Dangerous to Life and Health) value of 5 ppm / 10 mg
ozone/m³ additionally applies [NIOSH, 1994].
Symptoms of prolonged or excessive exposure to ozone are: burning, wa-
tery or irritated eyes, throat and nose, difficulty in breathing, dry cough, irri-
tation to nasal passages, bronchial and pulmonary membranes, headache,
nausea.
If excess ozone is produced (ozone odour), the air discharged from the
skimmer should be released into the atmosphere or passed through a re-
sidual ozone destructor.
DO NOT BLOCK AIR FLOW THROUGH EQUIPMENT. Ensure that enough
air passes through the ozone element (min. 0.22 gpm). If this minimum
value is undershot, the ozonizer is at risk of overheating.
Children must not be allowed to play with the device, as a mishandling can
cause severe injuries and death.
The ozonizer housing must never be opened under any circumstances. Im-
proper repairs can seriously endanger the user. DO NOT PUT FOREIGN
OBJECTS INSIDE THE EQUIPMENT. If repairs are necessary, please con-
tact a specialist dealer or the manufacturer directly.
Do not operate the ozonizer if it is damaged. Damaged ozonizers can seri-
ously endanger the user.
The ozone generator may be operated only with the power supply unit that
was delivered with the ozone generator. Usage of the ozone generator with
any other power supply UNIT constitutes a material alteration of the product
and Erwin sander shall not be held liable for any damages that occur as a
result of such an alteration.