Cruzer™ USB Flash Drive
Quick Start Guide
Minimum System Requirements:
• Windows 2000 SP4, XP and Vista
• Windows 2000, Macintosh OS 10+ and Linux (Storage only)
• USB 2.0 port required for high-speed data transfer
INSTALLING
• Windows 2000 SP4, XP, Vista
• Macintosh OS 10+
• Linux
No additional driver installation is required. Plug the USB Flash Drive into the USB port on your computer to use.
DISCONNECTING
You don’t need to shut down your computer to disconnect the USB Flash Drive, but to avoid losing data you should never
remove the device from the USB port while the LED is ashing. If a drive window is open, close any associated windows
before attempting to remove your USB Flash Drive.
Windows
These steps are not required for Windows XP.
Use the “Safe to Remove Hardware” hotplug icon in the notication area of the taskbar to safely remove the device before
unplugging. The notication area is to the right of the taskbar where you usually see the current time displayed.
1. In the notication area, right-click on the “safe to remove hardware” hotplug icon.
2. Select the device you want to unplug, and then click Stop.
3. When Windows noties you that it is safe to do so, unplug the USB Flash Drive from your computer.
Macintosh
1. Drag the removable disk to the desktop Trash icon.
2. Unplug your USB Flash Drive.
(Note: LED may stay illuminated)
Disposal Instructions
Do not dispose of this device with unsorted household waste. Improper disposal may be harmful to the environment and
human health. Please refer to your local waste authority for information on return and collection systems in your area.
www.sandisk.com/wug
Need help?
General
