EasyManua.ls Logo

Sandleford KSS02 - User Manual

Sandleford KSS02
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WALL
-
MOUNT
KEY SAFE
Instructions
HOW TO OPEN/CLOSE THE KEY SAFE:
1. Open shutter to reveal dials.
2. Rotate dials to current set combination
(the Factory combination is preset to 0-0-0-0)
3. Push button 1 next to the dials to open.
4. After closing the front cover panel, jumble the dials to
protect your combination and lock the Key Safe.
5. Close the shutter.
HOW TO SET YOUR COMBINATION:
1. Open the key box, leave all dials at the current combination
(the Factory combination is preset to 0-0-0-0)
2. Push the RESET button from position A to position B,
as shown in Fig 1.
3. Rotate the number dials to the desired combination,
as seen in Fig 2.
4. Push the RESET button back to position A, the new
combination is now set.
5. Close the shutter board.
Fig 1. Fig 2.
KSS02
PAGE 1 OF 2
HOW TO MOUNT YOUR KEY SAFE:
1. Open the Key Safe using the instructions above. Inside the
safe, there will be 5 holes on the backplate of the Safe.
2. Hold Key Safe in position on the wall and mark out the
holes with a pencil or marker.
3. Using a drill, drill four 6mm holes in the marked locations.
4. Place provided wall expander plugs into the drilled holes.
5. Move the Key Safe into position and secure using the
provided screws.
DialsButton 1
Shutter
Question and Answer IconNeed help?

Do you have a question about the Sandleford KSS02 and is the answer not in the manual?

Summary

How to Open and Close the Key Safe

Opening and Closing Procedure

Steps to open, set combination, lock, and close the key safe, including shutter operation.

How to Set Your Combination

Setting the New Combination

Instructions on changing the key safe combination using the reset button and dials.

How to Mount Your Key Safe

Mounting Instructions

Steps for mounting the key safe on a wall, including drilling and securing.

Installing Your Key Safe Methods

Wall Installation Method

Details for securing the key safe to a wall via drilling and screws.

Peephole Installation Method

Instructions for installing the key safe through a peephole using a bolt.

Important Notes

Key Safe Maintenance

Recommendations for water resistance and dial maintenance to prevent seizing.

Sandleford KSS02 Specifications

General IconGeneral
ModelKSS02
CategorySafes
BrandSandleford
Lock TypeElectronic
MaterialSteel
Battery TypeAA
Battery Life1 year

Related product manuals