To Next PageTo Next Page
Need help?Do you have a question about the Sandr Garden TL 40 and is the answer not in the manual?
General| Brand | Sandr Garden |
|---|---|
| Model | TL 40 |
| Category | Tiller |
| Language | English |
Emphasizes following manufacturer's instructions, user responsibility, and reading the manual thoroughly.
Specific dangers to be aware of, such as thrown objects and proximity hazards.
Details pre-operation checks, area preparation, and required personal protective equipment.
Lists and describes the main parts of the tiller as shown in Figure 1.
Step-by-step guide to fitting the handlebar retention plate and handlebars.
Instructions for attaching the wheel-bearing arm and the ploughshare to the tiller chassis.
How to start the engine using the throttle lever, for cold and warm starts.
How to start the engine using a fuel pump, especially for cold starts.
Basic steps for moving the machine, positioning the transport wheel, and engaging the cutters.
How handlebar pressure affects cutter speed and working depth.
Guides the user on adjusting the ploughshare for optimal performance in different soil types.
Engine maintenance, checking screws, rotating parts, and cutter condition.
Provides instructions on how to safely replace the rotating cutter blades.
Details on adjusting the cutter control cable and maintaining the reduction unit's oil level.
Recommendations for cleaning, transporting, and storing the tiller safely.
Lists key technical data like mass, cutting width, speed, sound level, and engine power.
