15
GB
Connecting to the Mains Supply
• This unit is designed to operate with an AC power supply.
• Connecting the unit to any other power source may cause damage to
the unit. Unwind the mains cable to its full length. Connect the end of
the cable to the DC IN Socket at the rear of the subwoofer and then
connect the mains plug to the mains socket. Make sure the mains plug
is fully inserted into the mains socket. The unit is now connected and
ready to use.
• To switch the unit o completely, switch ON/OFF to the OFF position or
unplug the mains plug from the mains socket.
Ensure all audio connections of the unit are connected before connecting to the
mains power socket.
To the mains socket
SANDWAVE_IB_140925_will.indb 15 25/9/14 4:25 PM
To Next Page
Loading...
Need help?
General
