Sandstrom SCBTS17 - General Operation; Powering and Mode Selection; Audio Adjustments

General Operation
Powering ON/OFF
When you rst connect the unit to the mains socket, the unit will be in standby mode. The
STANDBY indicator will light up red.
• Press the STANDBY/SOURCE to switch on the unit.
• Press and hold the STANDBY/SOURCE button to switch the unit back to standby mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit o
completely.
Selecting Modes
Press STANDBY/SOURCE button repeatedly on the unit to switch between BLUETOOTH,
AUX IN and USB mode.
• The eco-friendly technology saves power by switching the device to standby
mode when there is no input signal (or weak input signal) in BLUETOOTH /
AUX IN / USB mode for over 15 minutes.
• Please turn the unit o completely to save energy when not in use.
Adjusting the Bass
Turn the BASS dial to increase/decrease bass level.
Adjusting the TREBLE
Turn the TREBLE dial to increase/decrease treble level.
Adjusting the Volume
Turn the VOLUME dial clockwise/anticlockwise to adjust the volume.
10
SCBTS17_IB_170505_will.indd 10 5/5/2017 11:21 AM