9
Mouse DPI Setting
Press the DPI button on the mouse repeatedly to adjust the resolution
(800 - 1200 - 1600 dpi).
Energy Saving Function
• The keyboard and mouse have an energy saving function. If keyboard
or mouse is not activated for approx. 5 seconds, it switches to energy
saving mode. After 30 minutes of no activity, the LED switches o
and enters sleep mode. To wake up the keyboard or mouse, press any
button or move the scroll wheel.
• The keyboard or mouse switches o if a transmission signal is no longer
received. If necessary, remove the nano receiver to use this energy
saving function. Insert it in the receiver dock on the bottom of the
mouse as the receiver is very small and can be easily lost.
Hints and Tips
Mouse or Keyboard Not Working:
1. Make sure the Nano Dongle is plugged into a USB port and the
computer is on or try the Nano Dongle in a dierent USB port.
2. Change the battery if the keyboard or mouse no longer reacts to input.
3. If the Nano Receiver is plugged into a USB hub, try plugging it directly
into the computer.
4. Move the mouse or keyboard closer to the receiver.
5. If the mouse is moving erratically, change the working surface which
the mouse is operating on.
6. Restart the computer.
To Next Page
Loading...
Need help?
General