To Next PageTo Next Page
Need help?Do you have a question about the SandSun VA08H Series and is the answer not in the manual?
General| Model | VA08H Series |
|---|---|
| Category | Test Equipment |
| Type | Video Signal Generator |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Input Interface | HDMI |
| Output Interface | HDMI |
| Power Supply | 100-240V AC, 50/60Hz |
Overview of the overload protector's function and purpose in protecting machinery.
Guide for choosing the correct model based on press specifications and requirements.
Detailed technical specifications including flow rate, pressure, and air consumption.
Key press parameters like capacity, stroke length, and operating speed for model selection.
Formulas to calculate cylinder area, setting pressure, and flow rate for proper selection.
Guidelines for air and hydraulic piping installation, including size and cleanliness.
Important safety and operational precautions to follow during use.
Procedures for draining air from the unit, at the bolt and connector.
Explanation of the overload protector's operation during normal and overload conditions.
How to securely install the limit switch using bolts.
How to adjust the limit switch for correct operation using thickness gauges.
Common issues, their causes, and step-by-step solutions for the overload protector.
Detailed diagram and parts list for the VP-5007 pump assembly.
Detailed diagram and parts list for the VA08H overload valve assembly.
Visual representation of the product's external dimensions and model variations.
