B
Barbara VegaAug 4, 2025
What to do if my Saneo A007I-05C shows an E2 code?
- BbarreraericAug 4, 2025
If your Saneo Air Conditioner displays an E2 code, it means the water tank is full. To resolve this, simply empty the water tank.
To Next PageTo Next PageWhat to do if my Saneo A007I-05C shows an E2 code?
If your Saneo Air Conditioner displays an E2 code, it means the water tank is full. To resolve this, simply empty the water tank.
Why is my Saneo A007I-05C Air Conditioner not cooling enough?
If your Saneo Air Conditioner isn't cooling the room sufficiently, make sure that all doors and windows are closed. Also, eliminate any heat sources in the room or switch them off. Check that the exhaust pipe is properly connected and not blocked, and ensure the air inlet is clean. If the set temperature is too high, reset it to a lower setting.
Why won't my Saneo A007I-05C turn on?
If your Saneo Air Conditioner won’t turn on, it could be due to several reasons. First, check if the ‘full tank’ indicator light is blinking, indicating a full water tank, and empty it if necessary. Also, if you are using the heating mode, ensure that the room temperature is not higher than the set temperature; if it is, reset the temperature. If you are using the cooling mode, make sure that the room temperature is not lower than the set temperature, and reset it if needed.
What does E0 code mean on a Saneo Air Conditioner?
If your Saneo Air Conditioner displays an E0 code, it indicates that the temperature sensor is not working. You can replace the temperature sensor, but the appliance will still function without it.
General| Brand | Saneo |
|---|---|
| Model | A007I-05C |
| Category | Air Conditioner |
| Language | English |
