What to do if my Saneo Dehumidifier doesn't work?
If your Saneo Dehumidifier isn't working, check the following: * Ensure the power cord is securely plugged into the power outlet. * If the full tank indicator is flashing, empty the water tank and make sure it's correctly positioned. * Also, the device might not work if the room temperature is higher than 35°C or lower than 5°C.
Why is my Saneo Dehumidifier so noisy?
If your Saneo Dehumidifier is making excessive noise, it could be due to a couple of reasons: * The unit may be tilted or placed on an unstable surface. Ensure it's on a stable and solid surface. * A clogged air filter can also cause noise. Clean the air filter following the instructions in the manual.
Why is my Saneo Dehumidifier not dehumidifying?
If the dehumidification function on your Saneo Dehumidifier isn't working, check if the air filter is clogged and clean it according to the manual's instructions. Also, make sure that neither the intake nor the exhaust duct is obstructed; if they are, remove the obstruction.
Power| power supply voltage | 220-240 V |
|---|---|
| power frequency | 50 Hz |
| power consumption | 205 W |
Performance| dehumidification capacity | 10 L/day |
|---|
To Next Page