Need help?Do you have a question about the Sangean DT400W and is the answer not in the manual?
Automatically scans for and locks onto the next active signal station.
Manually adjust the frequency by pressing tuning buttons repeatedly.
Accesses and plays stations previously stored in memory.
Switching to WX band and setting alert times.
Confirms WX setting; ALERT indicator flashes, shows 'ALERT'.
Details reception, broadcast timing, and power consumption for alerts.
Frequency Range| FM frequency range | 87.5 - 108.0 MHz |
|---|---|
| AM frequency range (9k step) | 522 - 1629 kHz |
| AM frequency range (10k step) | 520 - 1710 kHz |
To Next Page
