What to do if Sanitas SFT 22 reads too high?
If your Sanitas Thermometer shows a temperature higher than 109,4 °F, ensure that you are operating the thermometer within its specified temperature range. Clean the sensor tip. If the error persists, contact your dealer or customer service.
What to do if Sanitas SFT 22 Thermometer reads too low?
If your Sanitas Thermometer displays a temperature lower than 93,2 °F, make sure you are using the thermometer within the correct temperature range. Clean the sensor tip. If you continue to receive the error, contact your dealer or customer service.
Why Sanitas SFT 22 doesn't work in extreme temperatures?
The Sanitas Thermometer requires an ambient temperature between 60,8 °F and 95 °F to function correctly. Ensure the surrounding temperature is within this range.
Overview of the front panel components including sensor tip and display.
Overview of the rear panel components including buttons and battery compartment.
Instructions for battery replacement and maintenance.
Step-by-step guide for accurate ear temperature measurement.
How to use the memory function to store and recall measurements.
General| Brand | Sanitas |
|---|---|
| Model | SFT 22 |
| Category | Thermometer |
| Language | English |
To Next Page
