Sanjian Studio PLJ-0802-A - Precautions; Wiring and Power Safety; Environmental and Stability Notes

CONTENTS
Overview ........................................................................................ 2
Technical Parameters......................................................................3
Operation ........................................................................................4

Two XH2.54-2P 20cm cables are included in the package. Please note
That these 2 connectors are keyed in reverse to each other.
Power: Red to + Symbol on board, Black to - Symbol
Signal: Red to ~ Symbol on board. Black to "Gnd"
Check the color polarity and connect correctly. Check the wiring polarity
of the socket assembly before applying power, and read the manual before
using the module to understand its operation.

Do not place the instrument in hot, humid, or dusty environments, and
mountings should prevent severe vibration.

After module is manufactured; the reference frequency oscillator was
aligned using a rubidium reference. The sensitivity adjustment has been
optimized so do not adjust unless necessary.
PRECAUTIONS
page 1
Precautions .................................................................................... 1
36536-TE