Sanjian Studio PLJ-0802-A - Technical Specifications; Measurement Performance; IF Settings and Frequency Reference; Supply and Connections

TECHNICAL SPECIFICATIONS
1. GATE TIME
 0.64sec
2. CHANNEL MEASUREMENT PERFORMANCE (CHANNEL LEVEL HIGH IMPEDANCE)
Measuring Range: 1 MHz ~ 1.2 GHz Accuracy: ± 100Hz
Channel sensitivity: (HM8134-2 Test Signal Generator)
Frequency (MHz)
5 10 30 60 100 150 200 300 450
mV RMS
35 20 10 3 3 4 8 15 12
Frequency (MHz)
500 550 600 700 800 900 1000 1100 1200
mV RMS
14 30 65 80 80 35 175 270 310
3. IF SETTINGS
Independent double-IF design allows the IF settings to be adjusted in minimum increments of 100 Hz.
 Intermediate frequency range: 0 - 999.9999 MHz
 Offset:
It can be set to add to subtract from intermediate frequency
4. FREQUENCY REFERENCE
13.000MHz temperature compensated voltage controlled crystal oscillator (VC-TCXO) in 5032 package
 Frequency stability: ± 2.5 ppm
5. SUPPLY
DC Input: 9V - 12V (Reverse polarity protected)
Current: <55 mA max (Test conditions Backlight on)


6. DISPLAY
Readout:
0802 2 line x 8 Character Backlighted LCD

8. Connections
DC IN (Power Interface): JST-HX2.54-2P socket
JST-HX2.54-2P socket
RF IN (signal input):
ICSP (programming interface):
2.54-6P Pin-Header



page 3
36536-TE