SANO Liftkar MTK 190 - User Manual

Questions and Answers

C
Cheryl RussellAug 11, 2025
What to do if electronic overload protection is switching on in SANO Liftkar MTK 190 Fitness Equipment?
- S
  Sara CookAug 11, 2025
  If the electronic overload protection is activated on your SANO Fitness Equipment, it could be due to a discharged battery. Try replacing the battery or waiting a few minutes before pressing the switch at the hand hold again. Alternatively, the equipment may be overloaded. In this case, allow it to cool down for 15 to 30 minutes before resuming use.
D
Dr. Carlos HortonAug 19, 2025
What to do if the motor does not run after inserting the plug in the battery unit of SANO Liftkar MTK 190 Fitness Equipment?
- L
  Lisa BarrettSep 12, 2025
  If your SANO Fitness Equipment's motor doesn't run and the electromagnetic brake doesn't release after inserting the plug into the battery unit, several issues could be the cause. First, check the fuse in the battery, and try a second battery unit if available. Another potential issue is a poor connection in the plug socket; consider changing the plug socket, ensuring correct placement of '+' and '-' to avoid damaging the electronic power switch. Finally, inspect the brake wires at the motor, as a brake issue can trigger the overload protection.
D
dustin88Aug 27, 2025
Why LIFTKAR SANO Liftkar MTK 190 Fitness Equipment does not lift straight?
- L
  Laura HillAug 27, 2025
  If your LIFTKAR SANO Fitness Equipment isn't lifting straight, the issue might be due to uneven tire pressure. Ensure that the tire pressure is correctly adjusted to resolve this problem.
M
Mrs. Erika CochranSep 2, 2025
What to do if main wheels are descending very narrow to the step margin on SANO Liftkar MTK 190 Fitness Equipment?
- C
  Christopher GonzalezSep 2, 2025
  If the main wheels of your SANO Fitness Equipment descend too narrowly to the step margin when going upstairs, the tire pressure might be too low. Correcting the tire pressure should resolve this issue.