SanRex UF-3 Series User Manual

9
How to connect unit control cables
Use an easy lock to bind up the control cables (for control power supply, major failure output, minor fail-
ure output, external input and output terminals, and conversion board) of the unit.
1
Fix the easy locks on the unit.
2
Bind the control cables with the easy locks.
Separate the cables for the control power sup-
ply and other cables to bind.
Other cables
Cables for the
control power
supply

SanRex UF-3 Series Specifications

General

Brand	SanRex
Model	UF-3 Series
Category	Controller
Language	English