Need help?Do you have a question about the Sansui SC-5300 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Signal to Noise Ratio | 58dB |
| Signal to Noise Ratio (Dolby B) | 65dB |
| Signal to Noise Ratio (Dolby NR Off) | 58dB |
| Total Harmonic Distortion | 1.5% |
| Output | 0.5V (line) |
| Type | single compact cassette deck |
| Heads | 1 x Record/Playback, 1 x Erase |
| Tape Type | CrO2 |
| Outputs | Headphones |
| Inputs | Line |
Diagram detailing the recording process for the left channel.
Explanation of the C-MOS LSI and logic control circuit functions in various modes.
Details on the mechanical operations including brake release, play, record, fast forward, and rewind.
Procedures for DC OV, tape speed, playback level, and recording bias adjustments.
Steps to adjust recording level and frequency response using test tapes.
Procedure for calibrating the VU meter levels.
Details on Half Switch, Rec Senser Switch, Flywheel Thrust Screw, and Pinch Roller pressure.
Procedures for replacing Capstan Motor, Reel Motor, Supply/Take-up Assy, Rec Senser Switch, Capstan Belt/Flywheel, and Tension Arm Assy.
Instructions for replacing the F.R. Idler and Head Cover.
Identification of various components and parts from different viewing angles.
Detailed circuit diagram for the amplifier section.
Detailed circuit diagram for the control section.
Visual guides for component placement on various circuit boards.
To Next Page
