SUENOS
3D SUPERNATURAL SOUND
WIRELESS EARBUDS
OVERVIEW OPERATION
Thank you for purchasing the Sueños Wireless Earbuds with 3D
SUPERNATURAL SOUND. Please read these instructions carefully
for proper operation and save for future reference.
Turning ON/OFF
Power on: Hold the MULTIFUNCTION (MF) button for
3 seconds until the white light illuminates.
Power off: Hold the MF button for 4 seconds until the
red light illuminates then turns off.
Connecting with Bluetooth
To play audio from a Bluetooth device,
you need to pair the device with your earbuds.
1. Hold the MF button for 3 seconds to power on the
earbuds, indicated by the voice prompt “Power on”,
then “Pairing”. The light blinks white, indicating
the earbuds are ready to connect with your
Bluetooth device.
2. Turn on Bluetooth mode on your device.
3. Select “Santana Suenos” to initiate pairing, and the
earbuds will automatically connect with your
Bluetooth device, indicated by a white light and
voice prompt “Connected”. Some devices ask you
to input the PIN “0000” as the password.
Note: Generally, there is a 10 minute maximum to pair
the earbuds with your Bluetooth device, otherwise
retry steps 1 to 3 to pair again.
MULTIFUNCTION (MF) Button
VOL(+) Button
VOL(–) Button
To Next Page
Need help?
General