Sanus Foundations HTB3 User Manual

INSTRUCTION MANUAL
Home Theater
Speaker Stands
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE
The HTB3 stands are designed to support satellite speakers.
CAUTION: Avoid potential personal injuries and property damage!
•
Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
•
Do not use this product for any purpose not explicitly specified by manufacturer.
•
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
•
If you do not understand these instructions or have doubts about the safety of the installation,
assembly or use of this product, contact Customer Service.
6902-602038 00
1.8 kg
(4 lbs.)
Speaker Weight Limit:
DO NOT EXCEED
Required Tools
Phillips Screwdriver
HTB3
Customer Service
Americas: 1-800-359-5520
•
info@sanus.com
•
sanus.com
Europe, Middle East, and Africa: + 31 (0) 495 580 852
•
europe.sanus@milestone.com
•
sanus.com
Asia Pacific: +852 2145 4099
•
sanus.ap@milestone.com
•
sanus.com
Australia: +61 (0) 7 3299 7000
•
sanus.australia@milestone.com
•
sanus.com

Sanus Foundations HTB3 Specifications

General

Brand	Sanus Foundations
Model	HTB3
Category	Racks & Stands
Language	English

Summary

Getting Started and Support

Customer Service Contact Information

Provides contact details for customer support across various regions.

Required Tools for Assembly

Lists the tools necessary for the successful assembly of the speaker stands.

Important Safety Instructions

Specifications

Supplied Parts and Hardware

Assembly

Carpet Spikes and Rubber Feet

Instructions for using carpet spikes or optional rubber feet on the base.

Base Assembly

Steps for assembling the base and poles, including attaching the M16 nut.

Pole Connection

Details on connecting the top and bottom poles, and securing with adjusting nut.

Mounting Options

Speakers with Threaded Screw Inserts

Instructions for mounting speakers with threaded screw inserts using brackets.

Speakers with Keyhole Slots

Steps for mounting speakers that feature keyhole slots.

Mounting Speakers with Top Plate

Using the top plate and screws for speaker attachment, including variations.

Mounting Speakers Without Mounting Holes

Attaching speakers without mounting holes using the dual stick speaker pad.

Wire Routing

Wire Routing Option 1

Method for routing speaker wires through the stand poles and base.

Wire Routing Option 2

Alternative method for routing speaker wires, using straps.

Disclaimer and Responsibility

Company Disclaimer and Warranty Information