Sanus Systems VMPL50A - Irregular TV Back with Longer Spacers

For TVs with an irregular/obstructed back. Ensure
that the bracket is level on the back of the TV.
Standard con gurations are shown. For special
applications, or if you are uncertain about your
hardware selection, contact Customer Service.
6901-002051 <05>
11
1-3
OPT
[01]
[02]
[01]
[02]
[01]
[02]
[01]
[02]
[02]
[01]
[15]
[16]
[16]
[15]
[05]
[10]
[08]
[13]
[17]
[17]
[17]
[17]
[19]
[19]
[19]
[19]
M5
M6
M4
M8
[17]
[19]
A
[01]
[02]
A. Determine the length of the spacer
that will be required ([18], [19], or
[20]). Push the shoulder washer [17]
through the appropriate slots and
holes of the brackets [01] and [02].
Snap the required spacer onto the
shoulder washer.