EasyManua.ls Logo

Sanuvox BIOPUR User Manual

Sanuvox BIOPUR
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Sanuvox Technologies Inc, © 2020 All rights reserved. July 2020 EN v.1
Instruction Manual
Photos illustrating products are non contractual.
BIOPÜR
ADVANCED PURIFICATION SYSTEM
Residential Model
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS PRODUCT.
Read and follow all instructions contained in
this manual before using the product. Failure
to comply with these instructions may result
in personal injuries or damage to the unit or
system.
1. Installation and servicing of air conditioning
and related equipment can be hazardous due
to systems pressure and electrical components.
Only trained and qualied service personnel
should install, repair or service equipment.
2. Untrained personnel can perform basic
maintenance functions such as replacing
lamp(s) and/or lter(s). All other operations
should be performed by trained service
personnel.
3. When working on the unit or system, observe
precautions in the literature, tags and labels
attached to the unit or system, and all other
safety precautions considered as best practices
in the HVAC industry.
4. When applicable, local regulation may
comprise more restrictive installation and/or
certication requirements. The afore mentioned
requirements prevail on those of this document
and the installer agrees to conform to these at
his own expense.
5. Follow all the safety instructions outlined in this
document and respect all local and national
codes applicable.
6. Never expose eyes or skin to ultraviolet light
from any source. Therefore, before installing
or performing maintenance on the unit or
system, TURN OFF AND DISCONNECT the
unit or system from all power sources (there
may be more than one switch to disconnect).
CAUTION: Electrical shock may cause
personal injuries or possibly death.
7. UV rays may destroy certain types of lters
(polymer or plastic); please keep the unit or
system light away from shining directly on
plastic.
8. When installing or performing maintenance on
the UV unit or system, it is recommended to
wear safety glasses and gloves. In order to
avoid reduced performance of lamp(s), do not
touch lamp glass without gloves.
9. UV lamps contain a small quantity of mercury:
if a lamp breaks, clean and dispose of with
care. UV lamps can be disposed/recycled after
use, as any other uorescent lamps. Contact
and follow your local and national authorities’
specic instructions.
10. Use only specied SANUVOX branded
replacement UV lamps with your unit or
system. Use of any other lamps will void your
warranty and can result in damage to the unit,
system and/or lamp(s).
11. Most UV units or systems are not waterproof.
DO NOT INSTALL OUTDOORS unless
specied otherwise.
SAVE THESE INSTRUCTIONS
Purchase Date: _______________________________________________
REGISTER
YOUR WARRANTY
ONLINE AT
www.sanuvox.com

Other manuals for Sanuvox BIOPUR

Question and Answer IconNeed help?

Do you have a question about the Sanuvox BIOPUR and is the answer not in the manual?

Sanuvox BIOPUR Specifications

General IconGeneral
BrandSanuvox
ModelBIOPUR
CategoryAir Cleaner
LanguageEnglish

Summary

Important Safety Instructions

Installation and Servicing Hazards

Highlights hazards of installing/servicing HVAC equipment and specifies trained personnel.

UV Exposure Warning

Warns against exposing eyes/skin to UV light and advises turning off power before work.

Safety Gear for Maintenance

Recommends safety glasses/gloves for installation/maintenance to avoid reduced lamp performance.

Use of Specified Replacement Lamps

Mandates using only SANUVOX branded lamps to maintain warranty and prevent damage.

Setup and Installation Guide

Operation and Display

Maintenance and Cleaning

Lamp and Filter Kit Replacement

Outlines the recommended schedule and procedure for replacing the UV lamp and filter kit.

Step-by-Step Lamp Replacement

Provides detailed instructions for safely removing and installing a new UV lamp.

Step-by-Step Filter Kit Replacement

Guides users through the process of replacing the unit's filter kit components.

Technical Information and Troubleshooting

Troubleshooting Common Issues

Addresses common problems like unit not powering on, noise, or visible light issues.

Warranty and Customer Support

Related product manuals