Need help?Do you have a question about the Sanwa LCR700 and is the answer not in the manual?
General| Type | LCR Meter |
|---|---|
| Measurement Parameters | L, C, R, Q, D, θ |
| Measurement Frequency | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
| Measurement Range (Frequency) | 100Hz to 100kHz |
| Display | LCD |
| Display Digits | 4 Digits |
| Power Supply | 9V battery |
| Operating Temperature | 0°C to 40°C |
Explains the meaning of warning symbols used in the manual and on the product for safety.
Provides critical safety instructions to prevent injury, electric shock, and damage to the instrument.
Explains the meaning of various indicators shown on the LCR meter's LCD display for different functions and modes.
Details the procedure for performing OPEN/SHORT calibration using directly connectable terminals for improved accuracy.
Explains the procedure for OPEN/SHORT calibration specifically when using the CL-700 clipping leads.
Explains the principle behind OPEN/SHORT calibration, how it reduces parasitic impedance effects from test fixtures.
Describes how to connect the device under test (DUT) using directly connectable terminals or clipping leads.
Lists essential pre-operational checks including instrument and lead condition, battery, and calibration.
Provides safety warnings and the measuring procedure for the Auto LCR mode.
Offers safety warnings and explains how to switch to and use manual LCR modes.
Details the measuring ranges and procedure for inductance measurements in manual LCR mode.
Details the measuring ranges and procedure for capacitance measurements in manual LCR mode.
Presents detailed accuracy specifications for Resistance (Rp, Rs) and Capacitance (Cp, Cs) across various ranges and frequencies.
Details the accuracy specifications for Inductance (Lp, Ls) across different ranges and frequencies, including D value impact.
To Next Page
